These Muncie transmission support braces help prevent cracked ears due to the rough conditions seen in racing.

• Made from 1/4" steel

• Powder coated gloss black

• All grade 8 fasteners included

Installation notes & tips

• The hex nuts included are used as spacers for the 1/2" bolts & go between the support brace and your transmission.

• The brace can be installed with the trans already in the car if you have the tunnel clearance for it.

• It is recommended  to get all bolts started first then tighten the front two, followed by the rear two, & finally the one on the side. The side hole is slotted horizontally to allow this.